Splash pH Reducer - Granules for lowering the pH.
To prevent or cure the problems caused by a high pH, use pH Reducer to lower the pH level.
Pool and Spa water should have the pH maintained between 7.2 and 7.8.
Instructions for use
- Test and check the chemical balance.
- Fill a clean bucket with water, and add the required dose of pH Reducer. Mix well to dissolve.
- Add the solution to the pool with the filtration running.
- Wait 2-3 hours for the product to mix, then re-test and repeat if necessary.
Always add chemicals to water and not water to chemicals.
Never mix chemicals
Always read the instructions on the container, prior to use